吸咐式潮濕機

◆產品性能 Product features

※有穩定可靠同樣的吸氣壓為和露點

1.吸咐塔之高速與直徑經調查結論細密換算，塔床障礙小，有保障了收縮有毒氣體變干劑5秒的使用精力，的標準機器設備氣的露點的標準。

2.30％的缺水劑總流量，在賠償金缺水劑的必然脆化，確保安全缺水。

3.大規模分散器，保障暖濕氣流不規則依據干熱劑層，去除溝流干涉現象。

※可再生氣量耗損需小于14％

1.優質的機筒的設計，儲存100％的吸卡路里，會自動儲存的卡路里使用在曾加重復利用學習能力學習能力過程的重復利用學習能力學習能力氣室溫，提供主設備的解吸學習能力，因此重復利用學習能力學習能力更全面。

2.潮濕和回收利用利用反相煙囪效應方案設計，濕大氣流淌干的活性炭吸附劑時效性果較好的。回收利用氣口含濕量把控在亞過飽和下，使排氣管消音器器及排氣管入口通道無結水之慮。

3.可據粗糙機的開機運行過載要改善重復氣儲電量，為了確保重復氣體流動反復平穩，重復工作壓力低至臨界值。

※空氣干燥劑利用使用期長

1.適合的機筒面積，使氣體完成干劑層的流動速度和的時間恢復好的階段，更加充分派揮干劑的使用性能。

2.合理可行的軟件配備，在氣團開始機筒前，經除油操作直接清楚氣團中內含油量物與重環保問題物，規避晾干劑層受環保問題。

※專用設備主要采用了大氣高品控電動三輪及氣動彈簧閥和穩定的全網上可java開發序調控器，電腦介面十分友好，自己持續出現雙塔工況法，巡環時間直播 可編，出廠檢驗報告確定10min。電動閥門耐用度有50萬次健身動作。

※筒身內部作冷熱鍍鋅除銹防銹補救，10年不生銹腐蝕現象。

※行動為準、特點安穩、工作方便，按裝不可理論知識。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆常見的技術主要參數 Main technical parameters