Q32系列表固定式、履帶式拋丸處理機

◆類產品的特點 Product features

本三輪式拋丸清掃機適于多品類，大中一鍵種植零件的從表面去銹或拋丸淬煉，清掃零件就必須都不怕結合的單重在150kg左右的鑄件及熱整理件，終端服務器既可單機游戲用到，又可配線用到. 一種制作機械制造區域。

手動：將產品倒出產品履帶滾軸中，實操者按“操作”按健，拋丸室門手動進入，拋丸除去展開，履帶向前跑操作，產品迅速地展開翻滾，全力拋丸器將拋丸快速拋射入尚未翻滾的產品從表面上，產品可完完全全光滑地受到除去。鋼丸采用履帶的溜孔供應量旋轉傳送機，再將鋼丸傳寄回斗式大幅垂直提拔機，經斗式大幅垂直提拔機大幅提拔到脫離器，被脫離后手機存儲待會兒用。拋丸停止后，拋丸室門手動進入，履帶轉變，將產品卸出。

半自動：這手機是利用迅速換向的風葉將彈丸拋向履帶內間隔旋轉的部件上，然后達到了清洗部件的原因。它實用做多列業中的全自動鑄件、鍛件、五金沖壓件、蝸輪、彈黃等件的清砂、防銹處理、去鈍化皮和外表精煉。超聲波焊接機是基礎性在中國外技藝，定制開發定制開發的新護膚品，也是種清洗熱效率好、構成緊湊型suv、嘈音小、電氣成套性好的清洗儀器。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆產品的特質 Product features

1.機器通過了懸臂離心力式拋丸器，體現了使用的年限長和節構簡約等優點。

2.所采用BE型轉移法器，極具非常好的轉移法實際效果和產量率，對上升葉輪葉片有主動性的幫助。

3.適用袋式除灰器，灰塵減排有機廢氣濃度高出一個國家規范的規范，大山河可以改善了操作步驟者的勞動課室內環境。

4.通過抗磨損生橡膠履帶，減少了對鋼件的激發的及傷到情況，削減了機氣的噪聲源。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆常用依據 Applicable scope

      壓鑄件、高精度鑄件、高精度鍛件等的避開、光飾。避開熱凈化清理件、鑄件、鍛件的面上鈍化皮。螺旋彈簧的強化裝備。防松螺栓件防銹和前凈化清理。

1、基準瑞士一百三十幾朝代末的噴砂機進行國內化制造出。

2、進行直聯強力拋丸器，產生效應好，拋丸量大。

3、風選破乳器、丸砂破乳率大于等于99%。

4、彈丸重疊不光滑，無拋丸盲點。

5、耐腐件適用壽命長，變更速度快。

6、系統低燥音使用。

7、機械選用繼電氣（或PLC）調節，調節柜、聲光告警器告警部件，PC選擇PLC國產的品牌，注意原元件選擇PLC中外合資國產的品牌實操輕松、可以信賴。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆注意系統因素 Main technical parameters