Q37類別吊鉤式拋丸清潔機

◆的產品講解 Product description

Q37(Q75)系統吊鉤式拋(噴)丸清掉機而我我司生產的其中一種新技術主設備。是在內地外比較廣泛調查研究的條件上，跟據觀眾的具體情況的需求而制作的。

吊鉤式拋丸清理機具備著以下的長處：

1. 用到大拋丸量、高拋射運行速度的懸臂式離心法拋丸器，能更為明顯地提生進行快速清理率、得到中意的進行快速清理質理。

2. 養成拋射圖及拋丸機廠家的所有的電子結構設計圖紙均齊全用到計算方式機輔助軟件結構設計(CAD)設計，拋丸器的并選擇及布局極為科學。

3. 主要采用很受歡迎大家的無地坑機構方式，即節約使用了地坑基本的施工作業加盟費實時間，又解決方法了朋友因地坑剩水而誘發的提高機內的丸砂生繡起塊現象。

吊鉤兼具什降、操作和室內吊頂旋轉視頻的特點。

4. 進行清潔車間內分為高鉻板防范，食用使用時間小臭提生，形狀美化、易改換。

智能：需拋丸處里的鋼件真接瓦特連桿在吊鉤或掛架子上，機器帶至拋丸室前部的帶領模式，吊鉤智能步入拋丸室。吊鉤步入拋丸室后，拋丸室門將手動關機，電氣公司火災報警系統，以杜絕鋼件在拋丸內的做出拋丸處里時同一些人誤開拋丸室門。吊鉤步入拋丸室在設置好的區段地點作反復導桿的運動和自轉，使鋼件被足夠拋射，縮短拋射?盲區。二個吊鉤、一些吊鉤在拋丸內的拋射，同一些吊鉤可裝載卸載鋼件。拋丸處里的時間間隔可無數個調整。拋丸器停此轉運后拋丸室門開，以帶進和帶出鋼件。拋丸處里中帶來的灰塵由二級考試吸塵器進行過濾排放出。

Q37(Q75) hook typeshot cleaning machine is a new equipment developed by our company. It is widely based on the research of the user, according to the actual needs of the design at home and abroad.

Advantages:

1. The amount shot, high speed of aerosol propellant international advanced cantilever centrifugal peen-forming implement, can improve clean rate, obtain satisfactory cleaning quality.

2. Trajectory simulation diagram and the machine shot all drawings are completely using computer aided design (CAD) is drawn, is shot selection and arrangement of the more reasonable.

3. The highly popular no pit structure , namely save the pit of the construction cost and time based, and solves the user for pit and cause the ascension of the standing device inside the pill sand. Corrosion agglomerate hook up with, operation, and the function of the indoor spin.

4. Clean indoor with using high chrome plate protection, service life greatly improved, beautiful appearance, easy to change.

Automatic: The workpiece need to shot is directlyhanged in the treatment or hang hooks on toshot, artificial with the front of the room, hook automatic traction systemshot into the room. Hook into is shot peen-forming room after room, pneumatic, electric interlocking goalkeeper closed, in order to avoid the workpiece in indoors is shot peen-forming processing by mistake when others open peen-forming room door. Hook into the room is shot in the back and forth position set interval reciprocal motion and rotation, to make the work be fully aerosol propellant, reduce aerosol propellant blind Angle. Two hooks, a hook on peen-forming indoor aerosol propellant, another hook can be unloading workpieces. Peen-forming processing time can be arbitrary adjustment. After the stop is shot peen-forming room door open, in order to bring in and take workpiece.Shot in the treatment of dust produced by secondary filter filter emissions.

◆應用范圍圖 Applicable scope

鈦鎂鋁碳素鋼材料壓鑄件、鋅碳素鋼材料壓鑄件、銅鑄件、不銹鋼管精密鑄造鑄件、球墨鑄鐵件、大排摩托車自行車架及碳鋼品件的外面清除、光飾、提高。

Aluminium alloy die casting, zinc alloy die casting, the copper pieces, stainless steel precision castings, castings, motorcycle frame and steel products a surface cleaning, light act the role ofing, strengthening.

Q37品類吊鉤式拋丸清掉機

◆物品共同點 Product features

1、定義瑞士一百三十多年 末的拋丸機廠家實行國產a化研制。

2、拋丸器用于直聯無刷主軸三相電機控制安裝，無刷主軸三相電機為直流變頻無刷主軸三相電機，可直流變頻可控硅調壓。

3、鋼丸訪問量的控制閥可進樣器改善，氣動式來與關掉。

4、選取芯筒輸入脈沖排塵器原理式排塵系統的。

5、組合件采用了PLC操作PLC把握儀選購日本這個國家三菱PLC，電囂電子器件選購simens或歐姆龍軟件。

6、無地坑設置。

1. Peference toGermany at the end of the ninety’s shot used the machine manufacturing.

2. Shot machinehas the direct coupling motor drive, motor for frequency conversion motor,variable frequency speed regulation.

3. Steel shot flow control valves can trace adjustment, pneumatic open and shut.

4. The world's most advanced core canister pulse blow type dust removal system.

5. Electrical PLC control PLC control instrument selection Japan mitsubishi, electricalcomponents choose Siemens or omron products.

6. Design without pit.

◆新產品代表 Product description

1、在基準外形中，拋丸機廠家標配自功式掛置控制系統。

2、相對中重型零件，拋丸清理機先選變電動胡蘆。

3、拋丸室的門有氣動平衡或自動鎖閉。

1. In the standard model, shot machine is equipped with manual suspension system.

2. For heavy workpiece, shot machine can be equipped with electric hoist.

3. The door of the room has a pneumatic or manual opening and closing.

手動：本型實現消除機比較合適于精密鑄造、搭建、礦業、交流電動機、加工中心等行業內的中、小形鑄、鍛件的外觀實現消除或增強操作。格外比較合適于多類種、小文件批量的鑄件、鍛件、鋁鎂合金鑄件及鋼構特征件實現外觀實現消除及拋丸增強，以刪去零件外觀的一些粘砂、砂芯及腐蝕皮；亦比較合適于對熱操作件的外觀實現消除及增強；通常比較合適于不適宜沖撞的細長、簿壁件的實現消除。

manual operation: This type of cleaning machine for foundry, construction, chemical, electric machine, machine tools, and other industries, small casting, forging of surface cleaning or strengthen treatment. Particularly suitable for variety of and small batch of castings, forgings, aluminum alloy castings steel structure and surface cleaning and peen-forming reinforcement to remove a small amount of the surface adhering sand, sand core and oxide skin; Also suitable for heat treatment a surface cleaning and strengthened; Especially suitable for long, should not be collision thin-walled package to clear.

We use shot technology to achieveshot cleaning rust, strengthen the purpose, because cleaning now is still the world's most economic and the most reliable method.

◆設備特殊性 Product features

* 加強自動化物品和黑色金屬部件的抗勞累耐腐蝕性

Lmproving the anti-fatigueperformance ofmechanical products and metal components

* 解除能力集中化

Eliminate stress concentration

* 提高其安全使用生存期

Prolong the service life

* 優化提升鋼件的表面能加工制作工藝 感覺

Optimizate the surface of the workpiece

* 極大加快清理工作工作效率

Greatly improve the efficiency of cleaning up

* 得到緩解整理工作任務的勞動者撓度

Reduce the labor intensity of cleaning up

* 減弱生活環境氣候干燥

Reduce environmental pollution

◆支持范圍之內 Applicable scope

本型系統普遍APP于自動化設備研制研制、工程建筑自動化設備研制、礦廠自動化設備研制、壓力差袋子、汽車的、船泊等行業領域，中用增長其廠品零機件的外裝質理和單單從表面的工藝情況下。

This equipment is widely used in mechanical manufacturing, engineering machinery, mining machinery, pressure vessel, automobile, shipbuilding industry, used for improving the product quality and the appearance of the parts surface process condition.

◆主要技術因素 Main technical parameters